Hydraulic crushing hammer is widely used in our life and is an important tool for hydraulic excavator.When we think of a hydraulic hammer, we think of the tools she USES in her excavation work, which we usually see during road construction.Hydraulic crushing hammer is mainly used in engineering construction to break rocks or stones. It can improve the efficiency of crushing operation.But after we use the crushing hammer, it is necessary to store the crushing hammer well, so how to save the hydraulic crushing hammer?Below small make up to take us to understand the storage of hydraulic fracturing hammer matters needing attention.I hope it was helpful.
1. The crushing hammer should be placed vertically. If it is not possible, the crushing hammer should be placed on the flat place where the slats are placed.
2. If the crushing hammer is placed on the wooden slats for more than 6 months, please check the corrosion status of all seals and bolts in the oil cylinder before operation.
3. In connection with the joints of excavator, loader and main parts, use the joint cap cover to seal the joints to prevent dust from entering the oil pipe.
4. The crushing hammer should be stored in a place with little change in temperature difference. Too high or too low temperature will cause damage to the crushing hammer.
5, When storage, should be removed from the steel, and let off the internal nitrogen.
6. The end of crushing hammer piston should be altered with butter, while the steel and bushing should be altered with anti-rust agent.
Above is small make up to share with you the hydraulic fracturing hammer preservation method, I hope to help you.And keep an eye on the hydraulic fracturing hammer.We will provide you with professional services.
Post time: Jan-14-2018
