Content overview of safety operation regulations for rotary grab

Content overview of safety operation regulations for rotational grapple 

 

(1) The operator shall be in good health and work with certificate after training and passing the examination.

 
(2) When operating the hydraulic grab, the operator shall concentrate and prohibit fatigue operation to prevent accidents.

 

(3) There shall be no sundries in the operating room to avoid hindering the operation.

 
(4) The operator shall be familiar with the structural performance, principle, use method, commissioning and other aspects of mechanical equipment to avoid operation errors.

 
(5) The installation and disassembly of the rotary grab shall be carried out in strict accordance with the regulations.

 
(6) Before using the rotary grab, check all parts for problems. In addition, check the instrument and lubrication to avoid problems.

 

(7) Before operation, the operator shall confirm the feasibility of grab construction and shall not construct blindly to avoid damaging the grab.

 
(8) When the grab enters the groove, it shall be slow and stable.

 
(9) During the operation of rotating grab, the steel wire rope shall be prevented from being disordered or broken. If the above phenomenon occurs, the operation shall be stopped immediately for treatment.
(10) After the hydraulic oil pipe is disassembled, be careful not to let sundries enter.

 
(11) The rotating grab shall be lubricated according to the regulations, the connecting parts shall be checked frequently for problems, and the operation and maintenance records shall be made.


Post time: Dec-21-2021