Don’t underestimate the discharge problem of the hydraulic rock crusher. Do you know that the size of the discharge port of the hydraulic rock crusher determines the size of the crushed ore and the production capacity of the equipment? Due to wear and changes in the particle size requirements of the finished product, it is necessary to adjust the size of the discharge opening from time to time. Shanghai Zhuoya hereby intimately summarizes 3 types for everyone
You can see how to adjust the discharge opening.
1. Pad type
The adjusting pad is generally located behind the toggle seat in the adjusting seat. When the discharge port needs to be adjusted, the number of backing plates can be increased or decreased, and the total thickness of the backing plates can be changed, so that the front and back positions of the toggle plates are changed, and the front and back positions of the lower part of the movable jaw can be moved to realize the change in the size of the discharge port.
a) from
Insert the backing plate
The adjustment pad is inserted from the rear of the crusher, the pad is shorter in length and lighter in weight. The operating space of the operator is limited, and it is not convenient to replace the backing plate.
b) Insert the backing plate from the side of the broken jaw
The adjusting backing plate is inserted from the side plate of the crusher. The backing plate is longer and heavier. The operating position of the operator is better and safer.
The adjustment of the backing plate is relatively simple, but it is often inconvenient. It is difficult to add or subtract the backing plate to adjust the discharge opening. It needs to be placed close to the crusher. On the one hand, it takes up space and on the other hand, it must be prevented from being lost. It cannot be adjusted steplessly, and cannot be adjusted automatically by hydraulic means.
2. Wedge block type
The wedge block type adjusting device is mainly composed of two identical wedge blocks. The wedge block is located behind the bracket seat in the adjusting seat, and the inclined surfaces of the two wedge blocks are relatively attached together. By changing the relative position of the two wedge blocks, the total thickness of the wedge block pair can be changed, so that the front and back positions of the brackets can occur. Change, move the front and rear positions of the lower part of the movable jaw to realize the change of the size of the discharge opening.
a) Mechanical adjustment
The mechanical adjustment method is that the movement of the wedge block is realized by manually rotating the adjustment screw. The adjusting screw is located on both sides of the crusher. One end of the adjusting screw is connected with the wedge block through a pin shaft, and is installed on both sides of the side plate of the crusher frame by means of adjusting nuts and supports. When you need to adjust the discharge opening, use a wrench to turn the screw on both sides of the frame to pull the wedge block, change the relative position of the two wedge blocks, and then change the total thickness of the wedge block to achieve the purpose of adjusting the size of the discharge opening.
b) Hydraulic adjustment
The hydraulic adjustment method is to change the adjustment screw in the mechanical adjustment method to a hydraulic cylinder, and the adjustment of the tension spring is also realized by the hydraulic cylinder, so that the automatic adjustment of the discharge port is realized, which is convenient and labor-saving.
3. Hydraulic cylinder type
The hydraulic cylinder discharge port adjustment device is equivalent to installing a large cylinder in the middle of the toggle plate, so that the length of the toggle plate can be steplessly adjusted to change the front and rear positions of the movable jaw and realize the adjustment of the size of the discharge port. .
The discharge opening adjustment device of this structure can not only automatically adjust the size of the discharge opening, but also can realize the functions of iron passing and cavity cleaning, which is convenient for operation and reduces labor intensity.
Post time: Aug-07-2021
